Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamazaki, Yasuhiro*; Shinomiya, Keisuke*; Okumura, Tadaharu*; Suzuki, Kenji*; Shobu, Takahisa; Nakamura, Yuiga*
Quantum Beam Science (Internet), 7(2), p.14_1 - 14_12, 2023/05
Oda, Chie; Kawama, Daisuke*; Shimizu, Hiroyuki*; Benbow, S. J.*; Hirano, Fumio; Takayama, Yusuke; Takase, Hiroyasu*; Mihara, Morihiro; Honda, Akira
Journal of Advanced Concrete Technology, 19(10), p.1075 - 1087, 2021/10
Times Cited Count:0 Percentile:0(Construction & Building Technology)Concrete in a transuranic (TRU) waste repository is considered a suitable material to ensure safety, provide structural integrity and retard radionuclide migration after the waste containers fail. In the current study, coupling between chemical, mass-transport and mechanical, so-called non-linear processes that control concrete degradation and crack development were investigated by coupled numerical models. Application of such coupled numerical models allows identification of the dominant non-linear processes that will control long-term concrete degradation and crack development in a TRU waste repository.
Nakayama, Masashi; Ono, Hirokazu
JAEA-Research 2019-007, 132 Pages, 2019/12
The Horonobe Underground Research Laboratory (URL) Project has being pursued by Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, northern Hokkaido. The URL Project consists of two major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies". The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had been prepared from 2013 to 2014 fiscal year at GL-350m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the EBS experiment is acquiring data concerned with Thermal-Hydrological-Mechanical-Chemical (THMC) coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. This report shows following works had carried out at the GL-350 m gallery. Excavation of a test niche and a test pit, Setting buffer material blocks and a simulated overpack into the test pit, Backfilling the niche by compaction backfilling material and setting backfilling material blocks, Casting concrete type plug and contact grouting, Consolidate measurement system and start measuring.
Ishitsuka, Etsuo; Sakamoto, Naoki*
Physical Sciences and Technology, 6(2), p.60 - 63, 2019/12
Tritium release into the primary coolant of the research and test reactors during operation had been studied, and it is found that the recoil release from chain reaction of Be is dominant. To reduce tritium concentration of the primary coolant, feasibility study of the tritium recoil barrier for the beryllium neutron reflectors was carried out, and the tritium recoils of various materials were calculated by PHITS. From these calculation results, it is clear that the thickness of tritium recoil barrier depends on the material and 2040 m is required for three orders reduction.
Shimada, Taro; Takubo, Kazuya*; Takeda, Seiji; Yamaguchi, Tetsuji
Progress in Nuclear Science and Technology (Internet), 5, p.183 - 187, 2018/11
After fuel debris is removed from the reactor containment vessel at Fukushima Daiichi NPS (1F) and collected in waste containers in the future, the waste containers will be disposed at a deep geological repository. The uranium inventory and uranium-235 (U) enrichment of the fuel debris are larger than those of high-level vitrified wastes which are produced from liquid waste during reprocessing of spent nuclear fuels. Therefore, there is a possibility not to be excluded that a criticality occurs in the geological media where the uranium precipitates at the far-field from the repository, after the uranium located in the repository is dissolved by groundwater. In this study, we calculated the quantity of uranium precipitated at the natural barrier, and studied dimension of uranium deposited in the natural barrier and carried out the criticality analysis.
Nakayama, Masashi
JAEA-Technology 2018-006, 43 Pages, 2018/08
The Horonobe URL Project has being pursued by JAEA to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, Hokkaido. The URL Project proceeds in 3 overlapping phases, "Phase I: Surface-based investigations", "Phase II: Investigations during tunnel excavation" and "Phase III: Investigations in the underground facilities", over a period of around 20 years. The OP corrosion test was prepared from 2013 FY at Niche No.3, and heating by electric heater in simulated overpack started in November, 2014. The objective of the test is acquiring data concerned with corrosion of carbon steel OP. These data will be used in order to confirm the performance of engineered barrier system. In the OP corrosion test, the diameter of simulated OP and buffer material are 100 mm and 300 mm, respectively. Concrete support using low alkaline cement was used in order to investigate the effect of cementitious materials to OP corrosion behavior. We will measure corrosion potential of carbon steel, natural potential, pH in buffer material for several years. In this report, we describe how to make simulated OP and buffer material blocks, and set sensors, and so on.
Nakayama, Masashi; Niunoya, Sumio*; Miura, Norihiko*; Takeda, Nobufumi*
JAEA-Research 2017-016, 62 Pages, 2018/01
The Horonobe URL Project has being pursued by JAEA to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, Hokkaido. The URL Project consists of 2 major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies", and proceeds in 3 overlapping phases, over a period of around 20 years. Phase III (Investigations in the underground facilities) investigation was started in 2010 FY. The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had started 2013 at GL-350 m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the EBS experiment is acquiring data concerned with THMC coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. This report shows consideration of concrete-type plug composition. The low alkaline cement developed by JAEA, called HFSC, was used for the plug. HFSC has used in construction test at the gallery as shotcrete in Horonobe URL.
Lopez-Martens, A.*; Henning, G.*; Khoo, T. L.*; Seweryniak, D.*; Alcorta, M.*; Asai, Masato; Back, B. B.*; Bertone, P. F.*; Boilley, D.*; Carpenter, M. P.*; et al.
EPJ Web of Conferences, 131, p.03001_1 - 03001_6, 2016/12
Times Cited Count:1 Percentile:43.7(Chemistry, Inorganic & Nuclear)Fission barrier height and its angular-momentum dependence have been measured for the first time in the nucleus with the atomic number greater than 100. The entry distribution method, which can determine the excitation energy at which fission starts to dominate the decay process, was applied to No. The fission barrier of No was found to be 6.6 MeV at zero spin, indicating that the No is strongly stabilized by the nuclear shell effects.
Nakayama, Masashi; Matsuzaki, Tatsuji*; Niunoya, Sumio*
JAEA-Research 2016-010, 57 Pages, 2016/08
The Horonobe URL Project has being pursued by JAEA to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, northern Hokkaido. The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had been prepared from 2013 to 2014 fiscal year at G.L.-350m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the experiment is acquiring data concerned with Thermal -Hydrological - Mechanical - Chemical coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. In this report, It is summarized the production of casing drilling machine for large diameter, simulated overpack, buffer material blocks and backfilling material for EBS experiment.
Nakayama, Masashi; Ono, Hirokazu; Nakayama, Mariko*; Kobayashi, Masato*
JAEA-Data/Code 2016-005, 55 Pages, 2016/07
The Horonobe URL Project has being pursued by JAEA to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, northern Hokkaido. The Project consists of two major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies", and proceeds in three overlapping phases, "Phase I: Surface-based investigations", "Phase II: Investigations during tunnel excavation" and "Phase III: Investigations in the underground facilities". Phase III investigation was started in 2010 fiscal year. The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had been prepared from 2013 to 2014 fiscal year at GL-350m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the experiment is acquiring data concerned with Thermal-Hydrological-Mechanical-Chemical (THMC) coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. This report summarizes the measurement data acquired from the EBS experiment from December, 2014 to March, 2016.
Nakayama, Masashi; Ono, Hirokazu; Tanai, Kenji; Sugita, Yutaka; Fujita, Tomoo
JAEA-Research 2016-002, 280 Pages, 2016/06
The Horonobe Underground Research Laboratory (URL) Project has being pursued by Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, northern Hokkaido. The URL Project consists of two major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies", and proceeds in three overlapping phases, "Phase I: Surface-based investigations", "Phase II: Investigations during tunnel excavation" and "Phase III: Investigations in the underground facilities", over a period of around 20 years. Phase III investigation was started in 2010 fiscal year. The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had been prepared from 2013 to 2014 fiscal year at G.L.-350m gallery (Niche No.4), and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the experiment is acquiring data concerned with Thermal-Hydrological-Mechanical-Chemical (THMC) coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. In EBS experiment, the backfill material using mixture of bentonite and muck from Horonobe URL construction was used for backfilling a part of Niche No.4. This report shows the results of properties of the backfill material, confirmation test of compaction method and making backfill material block, and so on. From these results, it was confirmed that the backfill material would satisfy target value of the permeability and the swelling pressure.
Kobayashi, Masato*; Saito, Masahiko*; Iwatani, Takafumi*; Nakayama, Masashi; Tanai, Kenji; Fujita, Tomoo; Asano, Hidekazu*
JAEA-Research 2015-018, 14 Pages, 2015/12
JAEA and RWMC concluded the letter of cooperation agreement on the research and development of radioactive waste disposal in April, 2005, and have been carrying out the collaboration work based on the agreement. JAEA have been carrying out the Horonobe URL Project which is intended for a sedimentary rock in the Horonobe town, Hokkaido, since 2001. In the project, geoscientific research and research and development on geological disposal technology are being promoted. Meanwhile, The Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry has been promoting construction of equipments for the full-scale demonstration of engineered barrier system and operation technology for high-level radioactive waste disposal since 2008, to enhance public's understanding to the geological disposal of HLW, e.g. using underground facility. RWMC received an order of the project in fiscal year 2014 continuing since fiscal year 2008. Since topics in this project are included in the Horonobe URL Project, JAEA carried out this project as collaboration work continuing since fiscal year 2008. This report summarizes the results of the research on engineering technology carried out in this collaboration work in fiscal year 2014.
Fujita, Tomoo; Tanai, Kenji; Nakayama, Masashi; Sawada, Sumiyuki*; Asano, Hidekazu*; Saito, Masahiko*; Yoshino, Osamu*; Kobayashi, Masato*
JAEA-Research 2014-031, 44 Pages, 2015/03
Japan Atomic Energy Agency (JAEA) and Radioactive Waste Management Funding and Research Center (RWMC) concluded the letter of cooperation agreement on the research and development of radioactive waste disposal in April, 2005, and have been carrying out the collaboration work based on the agreement. JAEA have been carrying out the Horonobe Underground Research Laboratory (URL) Project which is intended for a sedimentary rock in the Horonobe town, Hokkaido, since 2001. In the project, geoscientific research and research and development on geological disposal technology are being promoted. Meanwhile, the government (the Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry) has been promoting construction of equipments for the full-scale demonstration of engineered barrier system (EBS) and operation technology for high-level radioactive waste (HLW) disposal since 2008, to enhance public's understanding to the geological disposal of HLW, e.g. using underground facility. RWMC received an order of the project in fiscal year 2012 (2011/2012) continuing since fiscal year 2008 (2008/2009). Since topics in this project are included in the Horonobe URL Project, JAEA carried out this project as collaboration work continuing since fiscal year 2008. This report summarizes the results of engineering technology carried out in this collaboration work in fiscal year 2013. In fiscal year 2013, emplacement tests using buffer material block for the vertical emplacement concept were carried out and visualization tests for water penetration in buffer material were carried out.
Miyato, Naoaki; Kishimoto, Yasuaki; Li, J.*
Journal of Plasma Physics, 72(6), p.821 - 824, 2006/12
Times Cited Count:0 Percentile:0.01(Physics, Fluids & Plasmas)Zonal flow behaviour and its effect on turbulent transport in reversed shear tokamaks are investigated by global nonlinear simulation of ion temperature gradient driven turbulence. When safety factor is reduced, zonal flows in a minimum region change from oscillatory ones to stationary ones and suppress the turbulent transport effectively. This result indicates that the change of zonal flow behaviour in the minimum region may trigger the formation of ion transport barriers.
Ido, Takeshi*; Miura, Yukitoshi; Hoshino, Katsumichi; Kamiya, Kensaku; Hamada, Yasuji*; Nishizawa, Akimitsu*; Kawasumi, Yoshiaki*; Ogawa, Hiroaki; Nagashima, Yoshihiko*; Shinohara, Koji; et al.
Nuclear Fusion, 46(5), p.512 - 520, 2006/05
Times Cited Count:86 Percentile:92.73(Physics, Fluids & Plasmas)The electrostatic fluctuation spectrum and the fluctuation-induced particle flux of the JFT-2M tokamak were estimated using the hevy ion beam probe (HIBP) measurement. A geodesic acoustic mode (GAM) of the frequency about15kHz was identified in the L-mode. The GAM has its peak at about 3cm inside of the separatrix with the electric field of about 1.4kV/m. The estimated turbulent particle flux is found to be intermittent. It is found that the density fluctuation is modulated by the GAM in the wide frequency range and the coherence analysis shows that the flucruation-induced particle flux is partially contributed by the GAM. In the H-mode the GAM disappears and the fluctuation and the flux is much decreased.The mechanism of the large burst-like flux in the L-mode is not understood yet and left as the future problem.
Hayashi, Nobuhiko; Takizuka, Tomonori; Sakamoto, Yoshiteru; Fujita, Takaaki; Kamada, Yutaka; Ide, Shunsuke; Koide, Yoshihiko
Plasma Physics and Controlled Fusion, 48(5A), p.A55 - A61, 2006/05
Times Cited Count:7 Percentile:24.63(Physics, Fluids & Plasmas)no abstracts in English
Hayashi, Nobuhiko; Takizuka, Tomonori; Ozeki, Takahisa
Nuclear Fusion, 45(8), p.933 - 941, 2005/08
Times Cited Count:13 Percentile:41.32(Physics, Fluids & Plasmas)We have investigated profile formation and sustainment of current hole (CH) plasma by 1.5D transport simulations with current limit model inside CH based on Axisymmetric Tri-Magnetic-Islands equilibrium. Sharp reduction of anomalous transport in RS region can reproduce JT-60U experiments. The transport becomes neoclassical-level in RS region, which results in autonomous profile formation of ITB and CH through large bootstrap current. ITB width determined by neoclassical-level transport agrees with that in JT-60U. Energy confinement inside ITB agrees with JT-60U scaling. The scaling means that core plasma inside ITB is governed by MHD equilibrium limit, i.e., autonomous limitation of energy confinement. The plasma with large CH is sustained with full current drive by bootstrap current. The plasma with small CH and small bootstrap current fraction shrinks due to penetration of inductive current. This shrink is prevented and CH size can be controlled by appropriate external CD. CH plasma is found to respond autonomically to external CD. Application of CH plasma to reactor is discussed.
Kurosaki, Yuzuru; Takayanagi, Toshiyuki*
Chemical Physics Letters, 406(1-3), p.121 - 125, 2005/04
no abstracts in English
Hayashi, Nobuhiko; Takizuka, Tomonori; Ozeki, Takahisa
Proceedings of 20th IAEA Fusion Energy Conference (FEC 2004) (CD-ROM), 8 Pages, 2004/11
Profile formation and sustainment of tokamak plasmas with current hole (CH) have been investigated by using 1.5D transport simulations. A current limit model inside CH based on the Axisymmetric Tri-Magnetic-Islands equilibrium is introduced. We found that the sharp reduction of anomalous transport in the reversed-shear (RS) region can reproduce JT-60U experiment. The transport becomes neoclassical-level in RS region, which results in the autonomous formation of internal transport barrier (ITB) and CH through large bootstrap current. ITB width determined by neoclassical-level transport agrees with that in JT-60U. Energy confinement inside ITB agrees with JT-60U scaling, which means autonomous limitation of energy confinement. The plasma with large CH is sustained with the full current drive by bootstrap current. The plasma with small CH and small bootstrap current fraction shrinks due to inductive current penetration. This shrink is prevented and the CH size can be controlled by appropriate external current drive (CD). The CH plasma is found to respond autonomically to external CD.
Sengoku, Seio
Purazuma, Kaku Yugo Gakkai-Shi, 80(11), p.940 - 943, 2004/11
Recent spherical tokamak (ST) experiments exhibit many advantageous results including plasma start-up without center solenoid, higher fraction of non-inductive current, formation of internal thermal-barrier as seen on conventional tokamak. In order to reflect these efforts on the design of so called "non-inductive steady-state (SS) operation scenario" and "current ramp-up scenario" of low-aspect reactor, fractions of bootstrap current and neutral-beam-driven current on VECTOR-OPT reactor are estimated. The operation with this SS scenario is shown to be feasible if the normalized beta, n, is raised to grater than 5 typical in ST.